Hand Vascular Scanner
Knowing YOU...
by the back of your hand
The Hand Vascular Pattern Recognition (HVPR) technology verifies users utilizing individually unique vascular patterns
extracted from the hypoderm below the surface of the skin of the back of the hand using an infra-red based sensor device.
- VP-II X
- VP-II X is a biometric scanner that verifies users using the HVPR (Hand Vascular Pattern Recognition) technology, and is used for security access control or time and attendance. The VP-II X Scanner provides various interfaces with external devices through its digital I/Os, RS232, Wiegand inputs/outputs and TCP/IP ports. VP-II X has a built-in antenna to read a card, and a card reader module can be optionally installed inside the scanner. Supported card modules are proximity, iClass, Mifare and Ferica
-
-
Biometric feature Vascular pattern on the back of the hand Extraction method Infrared based contactless sensor Verification speed 0.4 second Accuracy FAR : 0.0001%, FRR : 0.01% Event logs Up to 500,000 logs Interface Ethemet / RS232 / RS485 / Wiegand / Digital I/O Supported card types Optional built-in card modules (Proximity, Mifare, iClass) with built-in antenna Max. Users 50,000 users Power supply SMPS included (AC100~250V, 50Hz / 60Hz) or External DC 12~15V Power consumption 18W (DC 12V, 1.5A) Dimension 110(W) x 200(H) x 130(T) mm
- VP-II XG (Door Controller)
- The VP-II XG is a Door Controller for the VP-II X Scanner to connect and control an electrical door-lock. The VP-II XG is separately provided and is connected to the VP-II X via RS232 (or RS485; an optional RS485 driver board needs to be installed at both VP-II X and XG to use RS485 interface), typically installed on the secure side of the door. The VP-II XG has a relay output to connect an electrical lock and digital input ports for door status monitoring and exit button interface.
-
-
Interface with VP-II X RS232, RS485(Option) Door control Dry contact output for door lock interface Input for exit button Input for door sensor Input for fire alarm Power consumption 18W (DC 12V, 2.5A) Dimension 194(W) x 197(H) x 45,7(T) mm